
INTELLIGENT CONTROL SYSTEME
Direct display of discharge temperature and pressure, operating frequency, current, power, operating state. Realtime monitoring of discharge temperature and pressure, current, frequency fluctuations.
THE LATEST GENERATION HIGH EFFICIENCY PERMANENT MOTOR
Insulation grade F, protective grade IP55, suitable for the bad working conditions. No gearbox design, motor and main rotor through the coupling directly connected, high transmission efficiency. Wide range of speed regulation, high precision, wide range of air flow regulation. The efficiency of the permanent magnet motor is higher 3%-5% than regular motor, efficiency is constant, when the speed drops, still remain the high efficiency
THE LATEST GENERATION SUPER STABLE INVERTER
Constant pressure air supply, air supply pressure is accurately controlled within a oi Mpa. Constant temperature air supply, general constant temperature set at 85 , make the best oil Lubrication effect and avoid high temperature to stop. No empty load, reduce energy consumption by 45%, eliminate excess pressure. Vector air supply, accurate calculation, to ensure that the air compressor production and customer system air demand at all times to maintain the same.
WIDE WORKING FREQUENCY RANGE TO SAVE ENERGY
Frequency conversion ranges from 5% to 100%. When the user 5 air fluctuation is large, the more obvious energy saving effect and the lower the low-frequency running noise, applicable to any place.
LOW NOISE
The inverter is a soft start device, the start-up impact very small. noise will be very low when start-up. At the same time, PM VSD compressor running frequency is less than the fixed speed compressor during stable operation, mechanical noise decreases very much
SMALL START UP IMPACT
Direct display of discharge temperature and pressure, operating frequency, current, power, operating state. Real time, monitoring of discharge temperature and pressure, current, frequency fluctuations.

10 HP PM Screw Compressorr

30 HP PM Screw Air Compressor

30 HP PM Screw Air Compressor2

50 HP PM Screw Air Compressor
TECHNICAL SPECIFICATION
MODEL | PRESSURE | INSTALLED MOTER RATING (KW) | CFM | M3 / MIN | MACHINE DIMENSION (L*B*H) MM /(WEIGHT) KG | NOISE (dB) | AIR OUTLET (INCH) |
---|---|---|---|---|---|---|---|
KC - 10HP PMV | 08 / 10 / 13 | 7.5 | 46 / 34 / 30 | 1.3 / 0.96 / 0.85 | 900*600*800 / 220 | 60 + 2 | G 1/2” |
KC - 15HP PMV | 08 / 10 / 13 | 65 | 65 / 46 / 39 | 1.84 / 1.3 / 1.1 | 1100*730*980 / 350 | 62 + 2 | G 3.4” |
KC - 20HP PMV | 08 / 10 / 13 | 15 | 88 / 71 / 60 | 2.49 / 2.01 / 1.7 | 1100*730*980 / 360 | 62 + 2 | G 3/4” |
KC - 25HP PMV | 08 / 10 / 13 | 18.5 | 113 / 95 / 78 | 3.2 / 2.69 / 2.21 | 1200*880*1080 / 510 | 64 + 2 | G 1” |
KC - 30HP PMV | 08 / 10 / 13 | 22 | 131 / 113 / 99 | 3.71 / 3.2 / 2.8 | 1200*880*1080 / 510 | 64 + 2 | G 1” |
KC - 40HP PMV | 08 / 10 / 13 | 30 | 181 / 160 / 124 | 5.12 / 4.53 / 3.51 | 1460*980*1230* / 650 | 66 + 2 | G 1 1/2” |
KC - 50HP PMV | 08 / 10 / 13 | 37 | 240 / 191 / 138 | 6.8 / 5.41 / 3.91 | 1460*980*1230 / 700 | 66 + 2 | G 1 1/2” |
KC - 60HP PMV | 08 / 10 / 13 | 45 | 275 / 242 / 212 | 7.8 / 6.9 / 6.00 | 1460*980*1230 / 780 | 66 + 2 | G 1 1/2” |
KC - 75HP PMV | 08 / 10 / 13 | 55 | 365 / 307 / 265 | 10.33 / 8.69 / 7.5 | 1750*1280*1590 / 1250 | 68 + 2 | G 2” |
KC - 100HP PMV | 08 / 10 / 13 | 75 | 476 / 410 / 346 | 13.48 / 11.61 / 9.8 | 1750*1280*1590 / 1350 | 68 + 2 | G 2” |
KC - 120HP PMV | 08 / 10 / 13 | 90 | 561 / 501 / 419 | 15.88 / 14.18 / 11.86 | 2450*1660*1700 / 1950 | 70 + 2 | G 2 1/2” |
KC - 150HP PMV | 08 / 10 / 13 | 110 | 717 / 600 / 516 | 20.3 / 16.99 / 14.61 | 2450*1660*1700 / 2200 | 70 + 2 | G 2 1/2” |
KC - 175HP PMV | 08 / 10 / 13 | 132 | 883 / 706 / 636 | 25 / 19.99 / 18.01 | 2450*1660*1700 / 2500 | 70 + 2 | G 2 1/2” |
KC - 220HP PMV | 08 / 10 / 13 | 160 | 1035 / 930 / 740 | 29.3 / 26.33 / 20.95 | 2700*1460*1900 / 3480 | 78 + 2 | G 3” |